Wednesday, July 2, 2014

Oculus Tuscany Reference Images

If I'm going to rebuild Tuscany in UE4, I needed reference images from the original. I spent a few hours tonight grabbing screen captures and then cropping them in Photoshop. I left the distortion in place because fixing would reduce the quality of the image.

A couple of observations:
1. None of the materials have normal/bump/etc. They are very plain.
2. This demo easily runs at 60 fps. That will be hard to match in UE4 when I'm done
3. Wall textures are single full images that have been hand crafted. There is no melding of textures in a complex material. That is what I'm going to do.
4. The wood beams looks really good
5. The stone wall around the yard can use some improvement

Overall, this demo has a really nice feel to it even though it is a bit primitive. It will be a challenge to replicate the look of it.

Substance Indie Pack
I bought the Substance Indie Pack when it was 50% off on steam. It is a tool for building materials quickly. I will be learning that as I build this scene. I will probably need to spend a few weeks learning that tool before diving into this project.

Reference Images:


































Tuesday, June 24, 2014

Learning by Replicating - Part III

Part 3 in an ongoing series to replicate a scene by evilmrfrank.

----------------------------------

I adjusted lighting more to remove errors
> increased Environment Intensity to 5 (this brightened scene considerably)
> adjusted radius of each light to not overlap

From this point out I'm only going to note things of interest

Add fog actor (BP_FogSheet) on the left, right & center
> he adds a lot of fog

I adjusted ceiling rocks to show off more of the above area and the fog within it

transparent selection: quick settings:allow-transluscent-selection

he adjusts the post processing volume
> scene color: source color tint: H15,S.238,V.69


------------------------------------------------
6/25/2014
------------------------------------------------

@ 7:45:05 : added 4 flowing water volumes:
M_Mod_WaterFlow_DCL_Master
> originally copied from default cave demo

He add BP_GodRay
> light rays coming straight down (pretty cool)
> radiates out from rotation point
> he goes to a lot of trouble to put it on the statue and then whacks it.
  > it is very finicky and only shows up at certain viewing angles.
> I kept mine in the cavern, increased intensity and left it animated

rift check : looks good

adds another ceiling rock on upper right: I didn't do that
adds GDC2012_Throne_Interior_Chain_05 on left & right (sc 2.5)

adjusts lighting on far right of cave to highlight rocks

I increased the intensity of my back interior lighting from 2000 to 6000

add 2 ivy copies on to upper left part of closet beam
add 2 ivy (SM_Cave_Ivy_01d) on left bottom side
add 2 ivy on right covering brick-rock & rock it sits on
add 1 ivy on lower left covering brick-rock

add 4 buried bricks (various small scale & meshes) in ground left of stream

add 2 colums at back and add rocks to cover top edges

@ 9:23:14 : man that is looking great




add ivy on left in bricks

he starts adjusting lighting in back of cavern. I'm happy with where I'm at.

add dust particles in god light
> Effects/Particles/Dust/PGPU_Dust_Vec_Large (sc 3 - he was 2.5)

add water falling into stream
> Effects/Particles/Water/P_Drips_Splash_Ripples
> I scaled to 1.3 and put right behind beam as if it is falling off of it
> I slowed it down a bit as well

At this point he add fire on the left. I'm not digging that.

I spent about an hour tweaking it so it looked good in the Rift

Done for the day


@ 9:49:00

I copied fire, sound and rocks round it from the Cave Demo
> I brightened up the light a bit
> I changed the color of the fog on the left by the fire to be orange

I added sound to the dripping water and ambient cave wind sound

He plays with the atmospheric fog
> start distance: 15000 -> 100

He plays with light source
> adjusts color to be slightly orange (H23,S.18,V1)
> lighting needs rebuilt
> this is like a warming color filter in photoshop.
  I toned it down to a saturation of .07. I didn't want to blow out
  the blues we work so hard on

Adds an exponential height fog outside of cave.
> he adjusts it a while and then whacks it

copies fog by fire and puts in outside cave
> scale it up. increase noise, brightness and panning speed to .01

adjust a few rocks and add vines on the left

@ 10:55:16


Comparing these last 2 images, it feels like a step backwards a bit. I think the adjustment to atmospheric fog lightened the scene too much. I need to revisit that later tonight.

6/27/2014

I adjusting fog and lighting to get the scene back to the prior look while keeping some of the new changes. This was the result:


Having done a ton of photography I've come to stray away from warming filters and to strive towards greater depth in lighting variation. The orange is a little too intense so I need to tone that down a bit.

 I neutralized the open area color and darkened the back area:


Yea, that's just about right. Off to work...

@ 10:55:16

add more rocks and grass on both sides
adjusts lighting
he grabs a god ray for the ceiling from the cave demo but I have one already
add a sword & fog from below outside
add another vine on the left and call it a day!

Here is the final scene

full screen

rift view

I will add movement to this in a week or so and post it as a mini demo for people.

Thursday, June 19, 2014

Learning by Replicating : Part II

This is part 2 of an ongoing series of posts on replicating a scene by evilmrfrank

Part 1 : http://oculusdrifter.blogspot.com/2014/06/amazing-ue4-tutorials.html

adjust light source rotation:
129.4, -84.37, 90

slide further ceiling rock further along x axis: 383630
slide closer ceiling rock further along x axis: 179640

build lighting (that darkens things)

return to light source via scene outliner.
> we are concerned with lighting of statue
> adjust light source angle to 3

select statue
> override lightmass resolution from 64 to 512

build lighting

go to world settings:
lightmass:lightmass settings
> use ambient occlusion
> environment color: gold (H=35,S=.244,V=.79)

return to light source via scene outliner.
> rotate in bit in multiple axis

build lighting

He rearranges the ceiling tiles to have light fall on the statue so the head is lit the way he wants it




go to modes:placement:volumes
> lightmass importance volume
> expand this just around the scene (not the walls or statue)
  > he switched to geometry editing mode

create a copy of the left rock wall in the scene
> move & rotate it so it covers the back (behind camera)

create another copy and place it on the right so that it is barely with the bricks and touches back

create another copy and rotate & place it so so it becomes the ceiling of our scene
> I gauged the final position based on how light fell onto the floor of the scene
> I also made it so you couldn't see it in the camera


back to scene object adjustment (whew!)

adjust 4 of the rocks on the left
add Rocks/SM_Cave_Rock_Small_01b on the left

He starts digging through colors to paint onto the floor again
> he settles on H300,S1,V1
> he paints portions of the left side with this.
  > this has a distorting effect on the land (sinking it a bit)

FLOOR COLORING REVIEW:
channels RGB (no alpha)
> BLUE       = pebbles
> GREEN      = pebbles water
> YELLOW     = stone water
> PURPLE(RB) = stone

He wants stone floor near the bricks and pebbles near the water

Here is how the paint is put onto the floor:

@ 2:56:24



------------------------------------------------

Add SM_Cave_Rock_Large_01b to left of scene behind furthest bricks
copy to the back right side of scene

Add point lights by back rocks

copy ceiling rock and rotate it so it is on the left side of scene
> remove a brick it overlaps

copy SM_Cave_Rock_Large_01b_2 from left of scene onto floor
> click on floor and select "paste here"
> scale to 200 on position to the back left of the statue
> copy and place right of the statue (rotate 180 degrees for symmetry)

rotate the statue back a bit and bring it forward so the face is in the light
> this looks really good

He starts replacing the large walls with lots of rotated copies of SM_Cave_Rock_Large_01b_2
> I rebuilt lighting to see if this was important. It is. You can see them so I need to follow along...

@ 3:07:14

------------------------------------------------

rock:
pos = 290225,-114090,-94560
rot = 78.8,-7.56,-97.1
sca = 200,150,200

@ 3:16:15

------------------------------------------------




Bring the large left wall back 

Add another ceiling rock so that it doesn't shade the scene and rebuild lighting

Back to scene with slower movement speed

Add SM_Cave_Rock_Med_01a
> scale 2:2:2
> put rock so it it is at the back left covering the edge
> create a 180 degree rotate copy on right side

adjust rock above statue (not sure why)

create another ceiling rock copy moved behind where scene is
> keep light that falls onto scene floor in-tact



Time for another comparison check (his on top, mine on bottom)



I used his image to adjust a few of my meshes to better match his layout.

create a copy of large left wall, rotate 90 degrees and block behind scene

copy left rock in scene (SM_Cave_Rock_Large_01a) wall to right side
> scale: 1:.75:1
> position to fill gap on right
> create a copy higher. rotate and adjust position a bit

adjust several bricks
> he makes a copy of one on the left and swaps it out for SM_Cave_Brick_01c
> he then uses a scale of -5 on the z axis which inverts the mesh. COOL TRICK
> scale : 4.5:4.5:-4.5

copy far left scene rock twice rotating it to make a visible arch

adjust the beam (and brick supporting it on right) to better show off the arch

------------------------------------------------

@ 3:48:18

select light source
> indirect lighting intensity : .1
> this makes the interior of the scene slightly darker

hide sprites and move bricks around

copy rock from back left into arch to smooth it out

I adjusted my scene a lot to match his lighting as much as possible
> He wants v-shaped lighting over the stream



Adding foliage:
Meshes/Foliage/SM_Cave_Ivy_01
> scale 3:3:3
> hang off beam on right side

world settings:
> environment color: H:220, S:.503, V:.792

plug up lower hole in back of scene with rotated copy of back wall

adjust a few bricks on the left

add another ceiling beam on left side.
add 2 more vertical beams, one embedded on each end of the scene

@ 4:21:12  : I tested in in the Rift. It looks great.





------------------------------------------------

He didn't like the environment color and changed it:
H:37,S:.31,V:.715

Override the lightmap resolution on everything to 512
> select all static mesh only
> that slowed down build time significantly (10 secs to 5 mins)
> I put it back to 64. It makes a difference in the end but not
  significant enough during level construction to justify build time
> he continues to construct the level while lighting build going on via un-lit mode

Add SM_Cave_Grass_01a (sc 3) on far left
Add SM_Cave_Vine_01c (sc 2) along arch (pivot point on vine is bad)
> adds a copy of it and does a transform along x axis (I think he wanted y)
> not having the rotation point in a good spot TOTALLY sucks.
> actually got the copy to hook over the beam. I'm keeping that!

4:49:26 : It gets tough here.

He copies a few elements from the cave demo
> He seems to copy a lot more than 3 items.
> I copied SM_Cave_Rock_Large_01b52, SM_ROC_TalonStruts_TopFrontA04278, M_Mod_WaterFlow_DCL_Master_2

World Settings:
> Environment Intensity : 1 -> .25

Adds Rocks/SM_Cave_Rock_Slate_01a
> quickly uses SM_Cave_Rock_Large_01b52 to get meterial (mag glass) and apply it to the new row (via arrow)
> leaves that hanging in middle of scene

adds a snow drift (01b) and changes material to same rock material above
> scale: .5 & place on right behind brick on floor

adds a snow drift (01a) and changes material to same rock material above
> scale: .75 & place on left along edge of bricks, half buried in floor
> add another and leave in middle

move right snow drive towards camera

paint all snow drifts blue (green mossy rock)

rotate second 01a snow drift on left in the rocks at the end (that looks good)

(I'm a bit picky about not having any part of the drift floating above the surface.)

make a copy on the right side

rescale grass on right to 5 & move into moss rock on left

.... I think light in main area has been removed from the scene. His is much darker than mine ...
> dropping the intensity on it from 5000 to 2000 for now

I adjusted the ceiling a bit to add another small area of light on front left

Add 2 bricks on the right

@ 5:25:01


------------------------------------------------
6/23/2014
------------------------------------------------

Add a post process volume (I already have one set to unbound
> I think unreal blew up on him
> enable all depth of field values
> Method         : Gaussian
> Focal Distance : 0
> Focal Region   : 1800
> Near Transition: 0
> Scale          : 1
> Near Blur Size : 0
> Far Blur Size  : .1

That looks pretty good in the Rift. I think it needs some adjustment, but very nice.

rotate a few bricks on the left.
add a brick copy on the right (sc 2)
move rock on left and place grass next to it (sc 4)
> rescale rock .75:1:.75
create copy of rock in front of it (1.25:1:.75)

copy rock 2 times, make smaller and position along stream
copy moss rock/snow-drift on left twice and position along stream on each side by rocks
add another rock on left along stream

copy mossy rock on left bricks to right, flip y and position along right bricks
add a rock and grass on right

@ 6:09:09


add war spoils shield on right of river (sc 2)
> add another moss rock section by it and a rock in front of it

I think he moved another view of the scene onto a second monitor

Add a point light in center and slide to lit area of stream
> color: H33,S.383,V1
> intensity: 500
> show all advanced details (eyeball in upper right of detail pane)
> use inverse squared fall off : unchecked (it got bright!): I like that look
> change intensity to .2
> attentuation radius: 1024
> I think he is changing work detail lighting settings off screen
> The effect of all this is very subtle: a slight orange tint to lit stream area
  > I guess he wants to enhance the lit area a bit

drag a sphere reflection capture into area
> above stream near shield
> influence radius = 512

copy that and move towards end of stream outside radius of first one

copy end of stream one and move it to upper left area
> influence radius = 768 (encompasses prior one)

@ 6:33:15

shrink the far right upper brick a bit

adjust the original light:
> color = blue
> intensity = 500

copy that and move it to the opening on the far left

At this point I have 2 overlapping lights (red Xs on them)
> copy again onto right side

Jist:
orange tint in lit areas
blue tint in dark areas

I added 2 white point lights to lighten up the cave to look like his

Tried in Rift again.
> it looks good but the frame rate is bad.
> reflections of light on the later is annoying too.
  > roughness of 1 removes this


A low roughness makes the scene look better overall but those reflections in the water are very annoying in VR.

I think several things are adding to the slowness of this scene:
1. light roughness
2. reflection captures
3. overlapping lights that cause lighting to switch to dynamic
4. distance blur

Once I am finished with this scene I will work on finding the optimum settings for performance.